Vacuum Formed ABS With ASA Texture Radome Cover

Vacuum Formed ABS With ASA Texture Radome Cover

An ABS radome cover manufactured via vacuum forming with a co‑extruded ASA (Acrylonitrile Styrene Acrylate) high‑weathering texture layer. Offers excellent UV resistance, anti‑aging performance, and radar wave transparency, suitable for automotive adaptive cruise control (ACC) radar, traffic monitoring sensors, and outdoor communication antenna housings.
Send Inquiry
Description

This product is designed for devices such as automotive mmWave radar, LiDAR, and outdoor sensors that are exposed to direct sunlight, sand, and dust. The base material is high‑rigidity ABS, with an ASA texture layer added by co‑extrusion or film lamination, then integrally formed via Vacuum Forming.

Weather Resistance, Long‑Term Outdoor Use
ASA is renowned for outstanding UV stability – no yellowing, chalking, or fading after prolonged outdoor exposure. The textured surface (leather grain, orange peel, or fine sand) conceals minor scratches while reducing glare from sunlight reflection.

Excellent RF Transparency, Signal Integrity
Uniform thickness (1.5–3mm) and stable dielectric constant of the material result in minimal attenuation of mmWave radar (24GHz, 77GHz) and LiDAR signals. The design avoids sharp corners and embedded metal parts, ensuring no blind spots in radar detection angles.

Vacuum Forming for Accurate Complex Curves
Vacuum forming accurately replicates 3D curved surfaces, matching vehicle grille or roof contours. Mounting clips, screw bosses, and weather‑sealing grooves can be integrally molded, enabling a tight fit with the vehicle or enclosure.

Impact & Chemical Resistance
The ABS substrate provides good impact strength to withstand stone chips during driving. The ASA surface resists car wash chemicals, bird droppings, and acid rain, keeping a clean appearance over time.

 

DJI20260430100332459

 

.

Large Size Fodder Table Growing Trays

1:Have you seen seedling trays that can hold a brick before without collapsing
2:The Extra Thick Black Plastic can withstand heavy loads.
3:Won't break or warp while moving trays filled with wet material
4:Store trays when not in use without worrying about being crushed

 

Our 72 Cell Plug trays have been recently upgraded to be 2.25" deep. This makes them the perfect tray for bottom watering your plants. Each cell will reach the bottom of your 1020 flat minimizing the amount of water needed.


The flat tray is a bit wider on the top and slightly tapers to the bottom to make the trays stackable for easy storage.
Outer dimensions of Cell Tray and Flat Tray
1:21.25 Inches Long,11 Inches Wide,2.25 Inches Deep Cell Tray and 2.5" Flat Seed Tray
2:Cells are a bit wider on the top and slightly tapers to the bottom, with drainage holes

Large Size Fodder Table Growing Trays

 

Some other growing trays

 

Large Size Fodder Table Growing Trays

 

Material suggestion

 

Characteristic

Material

Strength

Clear

Price

Application

ABS

Good-High impact

Not Avaliable

Medium

Caravan parts,vehicular parts, Electrical / Equipment Enclosures

Acrylic/Pmma

Medium to high strength

Yes

Medium

Signs, light cover,domes, light diffusers

PS

Medium to good strength

Yes(clarity not to quality of PETG/PC/PMMA)

Medium

Packaging, microgreens tray

PC

Very good impact strength

Yes

Expensive

Machine guard, Cover, enclosure, light cover

PP

Soft

Translucent

Inexpensive

Packing tray,containers,tank,enclosure, medical application

HDPE

Soft

Translucent

Inexpensive

Enclosure, Vehicular parts

PVC

Good

Yes

Inexpensive

Packaging, machine guard, car trim

PETG

Good-High Impact

Yes

Expensive

Medical application

 

Customer visiting

 

Large Size Fodder Table Growing Trays

 

Contact information

product-1600-800

 

FAQ

 

Q: What does the customers need to provide?

A: If you need custom covers or some other plastic products, please provide 3D drawing, if you need custom packing trays, you can provide the parts tray or tray drawing

Q: How long does it take to open molds and mass production?

A: Open mold need 2 weeks and mass production need 3 weeks, it mainly depends on the order quantity.

Q: What is the moq?

A: It depends on product materials, our moq can be adjust according to whether the material is conventional and the size of the product.

Q: What mold can we make?

A: Usually aluminum mold, but if the customer wants to see the effect first, you can also open wood mold

Q: What material is most widely used?

A: AB is the most commonly used, which can meet a lot of performance, such as shell classes, tray classes, etc., will use ABS

 

 

 

 

Hot Tags: vacuum formed abs with asa texture radome cover, China vacuum formed abs with asa texture radome cover manufacturers, suppliers, factory, OEM Design Vacuum Formed Blister Medical Testing Equipment Housing, ABS Textured Vacuum Formed Protective Plastic Covers, Vacuum Formed ABS Enclosure Anti Uv Industrial Equipment Cover, Device Housing Forming, Plastic Housing Forming, equipment housing