Thermoforming factory for AGV enclosures industry. Send your drawing(includes a comparison of 5 materials)。

May 09, 2026 Leave a message

Do you manufacture enclosures for AGVs, medical equipment, outdoor charging stations, or water treatment control cabinets?
Have you recently encountered issues such as yellowing, cracking, insufficient structural strength, or customer complaints regarding your enclosures?
If so, please read this article to the end. We directly address the top 5 material-related questions our clients ask most frequently, helping you select the right material right from the design phase.

 

1. Which is stronger: ABS or PC?
The answer is: PC is stronger.
So, when should you choose ABS? When the product is for indoor use, does not require exceptionally high structural strength, or when the budget is limited.
Most industrial enclosures, AGV bodies, and medical equipment housings are made using ABS.
And when should you choose PC? When impact resistance is required (e.g., for safety shields or protective covers), when high-temperature resistance is needed, or when you require a material that is both transparent and high-strength.
Recommendation for AGV Enclosures: ABS is typically sufficient. Switching from metal to ABS alone results in a 50% weight reduction. While PC offers higher strength, it also comes at a higher cost and is generally unnecessary for this application.
Our Client Case Studies: We utilized ABS for both a yellow AGV enclosure and a water treatment control cabinet housing; in both instances, client feedback has been excellent.

http://www.swellderplastics.com/vacuum-forming-plastic-cover-shell/thermoforming-automatic-equipment-cover.html

thermoforming agv cover

2. Can ASA be used as a substitute for ABS in outdoor products?
The answer is yes-and in fact, it *should* be substituted.

Why is ASA better suited for outdoor use than ABS?
ABS contains a component called "butadiene." When exposed to ultraviolet (UV) light, the molecular chains within the butadiene break down-causing the material to yellow, become brittle, and eventually crack.
ASA replaces the butadiene found in ABS with "acrylate." The result? Its UV resistance is 10 times greater than that of ABS.
When should you use ASA?
For outdoor charging station enclosures
For agricultural machinery housings
For outdoor medical equipment
For any component that will be exposed to direct sunlight
ASA is 30–50% more expensive than ABS. However, if you factor in the costs of repainting or replacing ABS enclosures once they have yellowed, ASA actually proves to be the more cost-effective choice in the long run.
Our Client Case Studies: We recommended the ASA-as-substitute-for-ABS solution to one of our medical equipment clients, successfully resolving cracking-related complaints they had been receiving for years.

 

3. What is Flame-Retardant ABS? What types of products utilize Flame-Retardant ABS?
The answer is: Flame-Retardant ABS contains added flame retardants, allowing it to self-extinguish when exposed to fire. It is required whenever a product needs to pass safety certification.
In what scenarios is flame-retardant ABS used?
Medical equipment (patient safety)
Electric vehicle battery components (fire safety requirements)
Electrical control cabinets (safety regulation certification)
Public transportation equipment (safety standards)
Our Client Case Study: We recently produced a set of enclosures for a water treatment electrical cabinet. The client required a UL94 V-0 rating, and we successfully passed the necessary tests.

http://www.swellderplastics.com/vacuum-forming-plastic-cover-shell/water-treatment-equipment-electrical.html

thermoforming electrical box

4. Can vacuum forming be used to produce transparent parts? What materials are used?
The answer is yes. For applications requiring high transparency, Acrylic (PMMA) is used; for applications requiring high strength, PC is used.
In what scenarios is PMMA used? When optical-grade light transmission is required (surgical lights, optical equipment), when high surface hardness is needed (resistance to scratching), and when high structural strength is not a primary requirement.
In what scenarios is PC used? When impact resistance is required (safety shields, machine guards), when high-temperature resistance is needed (up to 120°C), and for parts with complex shapes (as PC offers better flow properties).
Our Client Case Study: A medical client from India traveled specifically to our factory to inspect samples of PMMA surgical light covers. Impressed by the high transparency and bubble-free finish, they approved the samples on the spot.

http://www.swellderplastics.com/vacuum-forming-plastic-cover-shell/vacuum-forming-pc-diffuser.html

thermoforming pmma cover

5. What are the shrinkage rates for ABS, PC, PMMA, PP, and HDPE materials?
The answer is that shrinkage rates vary depending on the material; therefore, a shrinkage allowance must be factored in when designing and manufacturing the mold.
The shrinkage rate for ABS is 0.5%.
The shrinkage rate for PC is 0.6%.
The shrinkage rate for PMMA is 0.5%.
The shrinkage rate for PP is 1.6%–1.8%.
The shrinkage rate for HDPE is 2.5%.

 

Are you unsure which raw material to select for your vacuum-formed product?
Send us your technical drawings, and within 24 hours, we will provide material recommendations along with a reference quotation.
Please provide the following specific requirements:
1. Intended environment: Indoor or outdoor?
2. Strength requirements.
3. Is safety certification required?
4. Budget and production batch size.
Then, please contact us at elena.zheng@swellder.com.
We work with a range of materials, including ABS, PC, ASA, PMMA, ABS/PC alloys, and flame-retardant grades. We also offer small-batch prototyping services.