What should I do if the edges of my PET-formed product scratch my hands?
It's widely known that PET offers the best balance of strength and cost. If you need to rotate and stack over 20 packing trays, prevent them from falling apart, and have reasonable cost requirements, then our blister packaging factory will definitely recommend PET. If you're not particularly cost-conscious, then ABS is your best choice. ABS offers both strength and toughness, preventing burrs and cuts on the edges of the trays. However, ABS costs nearly double.
On a different note, some people might ask why not use PP or PS. PP and PS are inexpensive and affordable, but they're too soft. When stacked, they lack the necessary strength and are prone to tipping. Even with numerous ribs, the inherent softness of the material doesn't guarantee sufficient strength. Since PET trays have sharp edges, how can we improve them? After all, frequent scratches are a nuisance. However, simply improving the sharpness won't achieve significant results. Simply reducing the sharpness can be achieved by replacing the die cutter, switching from a standard die cutter to a heated die cutter. The heated die heats up the burrs on the edges, thus reducing the sharpness of the tray's edges.http://www.swellderplastics.com/packaging-tray/plastic-packing-tray/blister-cavity-foods-tray-for-cake-dessert.html
There are a few key points to keep in mind when doing this:
1. The temperature should be kept between 110-130°C. Too high will cause stringing, and too low will be ineffective.
2. It's best to use a chiller for immediate cooling, which results in smoother edges.
3. Changing the die cutter angle to an 85-degree bevel is recommended, as it's safer than a right angle.

The following discusses other aspects, including material modification, design optimization, cost accounting, worker safety, and industry trends.
1. Material Modification: Can PET maintain strength while reducing burrs?
PET's hardness and brittleness are the primary causes of sharp edges, but material modification may improve this issue:
1.1 Adding toughening agents: Such as small amounts of elastomers (TPU, EVA) or nanofillers, can improve edge toughness without significantly increasing costs.
1.2. Blending with other plastics: For example, PET+PC or PET+ABS alloys, to balance strength and flexibility, but testing is required to determine whether this affects recyclability.
1.3. Surface coating: After thermoforming, a flexible coating (such as water-based polyurethane) can be sprayed on to cover edge burrs, but adhesion and food contact safety (if used for food packaging) must be considered.
Industry Reality: While modification is beneficial, blister packaging manufacturers are typically only processors, and the material formula is controlled by upstream raw material suppliers, making it difficult for small and medium-sized customers to obtain customized materials.
2. In-depth Optimization of Molds and Processes
In addition to heated die cutting, other process details can reduce edge sharpness:
2.1 Laser cutting instead of punching: Non-contact cutting offers smoother edges, but equipment costs are high and efficiency is low, making it suitable for high-value-added products.
2.2 Multi-stage punching: Pre-cut first, then fine-trim to reduce burrs caused by stress concentration.
2.3 In-mold edge pressure design: Adding an edge pressure structure to the blister mold allows the edges to naturally form rounded corners, but this may increase demolding difficulties.
Cost trade-off: Although heated die cutters are more expensive, they have a longer lifespan, and the per-piece cost may be more cost-effective than subsequent manual trimming.
3. Structural design: How can edges be "hidden"?
If sharp edges cannot be completely eliminated, design can reduce the likelihood of contact:
3.1 Flanged edge design: Curling the edge inward or outward creates a "wrapped" effect, similar to the edge treatment of some plastic lunch boxes.
3.2 Rib guidance: Adding subtle concave and convex structures to the edge naturally guides the hand away from sharp edges.
3.3 Auxiliary handles: Adding soft rubber grips or grooves to the edge of the tray reduces the chance of direct contact with sharp edges.
Limitations: Design changes may affect stacking stability or mold costs, requiring the customer to accept the cost of re-mold.
4. Worker Safety and Business Management Perspective
Scratching edges may seem minor, but in the long run, they can lead to:
4.1 Risk of Workplace Injury: Frequent scratches can lead to worker resistance and even labor disputes.
4.2 Loss of Efficiency: Workers slow down their work for fear of scratches, impacting production efficiency.
4.3 Hidden Costs: The cumulative cost of purchasing protective equipment such as gloves and Band-Aids is significant.
5. Solutions:
5.1. Mandatory wearing of cut-resistant gloves (but workers may be reluctant to wear them in the summer due to the heat).
5.2. Add automated pick-and-place equipment to the assembly line to reduce manual contact.
5.3. Incorporate edge treatment into product quality standards, not just a "cosmetic issue."
6. Industry Comparison: Why are European and American products less prone to this problem?
Comparing similar products from abroad shows fewer edge burrs. Possible reasons include:
6.1 Material Differences: PETG (modified PET) is more commonly used in Europe and the United States. It is tougher and easier to process, but its price is 30%-50% higher than PET.
6.2 Process Standards: Mandatory deburring of blister packaging products (e.g., vibration grinding, freeze-drying, etc.).
6.3 Design Concept: Emphasize ergonomics and avoid sharp edges from the outset.
6.4 Domestic Dilemma: Amidst price wars, customers often choose "just enough to work," forcing factories to compromise on detailed craftsmanship.
7. Ultimate Consideration: The Conflict Between Cost and User Experience
7.1 The edge issue of PET trays is essentially a typical pain point of the "cost-first" model:
7.2 Customers demand "low price + high strength," and PET is the optimal solution, but at the cost of a poor user experience.
7.3 Improving the process or switching to better materials will increase costs and may result in lost orders.
7.4 Breakthrough Paths:
7.4.1 Customer Education: Use data to demonstrate that ABS/PETG offers lower long-term overall costs (e.g., reduced work-related injuries and improved efficiency).
7.4.2 Market Segmentation: Provide basic PET options for price-sensitive customers and promote PETG/ABS solutions for high-end customers.
7.4.3 Industry Collaboration: Promote supply chain integration and reduce the cost of modified materials through scale.
All in all, the edge issues of PET blister trays may seem minor, but they reflect a common dilemma in the manufacturing industry: how to strike a balance between cost, efficiency, and humaneness. This can be alleviated in the short term through process optimization (such as heated die cutting), but in the long term, the industry must work together to upgrade materials and raise standards. After all, workers' hands are the most valuable "equipment" on the production line.
