Small body, big manufacturing: Thermoforming technology breaks through the micro- EV car market

Oct 11, 2025 Leave a message

Why is Vacuum forming the preferred choice for micro vehicles?

 

The application of vacuum forming in plastic parts for micro vehicles ("micro vehicles" here can refer to micro electric vehicles, mobility scooters, sightseeing vehicles, logistics delivery vehicles, golf carts, and other vehicles) is characterized by low production volumes, cost-sensitive operations, and relatively simple structures. Vacuum forming EV plastic car parts

 

This is primarily due to its inherent advantages:

 

Extremely Low Mold Cost:

 

Core Advantage: Blister molding molds are typically made of cast aluminum, resin, or even wood, costing only 10%-20% of traditional steel injection molds.

Significance: This makes small-batch production economically feasible, significantly reducing the initial investment risk and entry threshold for businesses.

 

Ideal for Large-Size Part Production:

 

The entire front, roof, and side panels of a micro vehicle are large panels. Blister molding machines can easily handle large sheet materials, while large injection molding machines require expensive equipment and exorbitant mold costs.

 

Short Development Cycle:

 

Mold manufacturing is simple and fast, with the process from drawing to prototype taking only a few weeks. This is crucial in the micro vehicle market, characterized by rapid market response and rapid model changes. Low investment threshold:
The cost of establishing a complete blister production line (including heating, forming, cooling, and cutting) is far lower than that of a traditional metal body production line involving stamping, welding, and painting.

 

Main Application Components


Thermoforming applications are extensively used in mini-cars, focusing on the following areas:

 

1. Body panels - the core application


This is the "main battlefield" of the forming process. Almost the entire non-load-bearing outer shell of the vehicle body can be assembled from vacuum forming parts.

 

Front/rear panel assembly: The entire outer shell of the front and rear of the vehicle.

 

Side panel assembly: Includes the entire side panels above the left and right door sills and below the windows.

 

Top cover: The outer shell of the roof.

 

Door skin: The outer door panels.

 

Engine hood/tailgate: For mini-cars requiring these structures.

 

Features: These large components are assembled from several blister parts to form a complete "plastic body," replacing traditional sheet metal. 2. Bumper

The bumper skin is formed by thermoforming, and filled with foam or plastic brackets for cushioning, forming a complete bumper assembly. The cost is significantly lower than injection-molded bumpers.

 

 Interior Parts


Instrument Panel: The thermoforming method can create a surface with exquisite leather, wood, or carbon fiber textures, which serves as the front instrument panel skin.
Door Interior Panel Base: Serves as the skeleton of the door panel and is then covered with fabric or PVC.
Other Decorative Panels: Such as A-pillar and B-pillar trims.

 

Commonly Used Materials


Material selection primarily considers cost, weather resistance, and processability.
ABS:
Advantages: High surface gloss, easy painting, excellent strength and toughness, and good processability.
Applications: Body panels and interior parts requiring high surface appearance. A very common choice.
PP:
Advantages: Lowest cost, excellent chemical resistance, and low density (lighter).
Disadvantages: Low surface energy, often requiring flame treatment or primer before painting. Applications: Extremely cost-sensitive parts or interior structural components that don't require painting. PP wood powder board is also used for interior baseboards.
ASA:
Advantages: Excellent weather and UV resistance, and resists fading and chalking.
Applications: Commonly used for unpainted exterior parts or as a colored sheet material to achieve "body color."

 

All in all.
For micro vehicles, the forming process is an optimal solution within specific cost and production scale constraints. It offers a perfect balance of appearance, functionality, cost, and efficiency. It is in this market segment that the blister process fully demonstrates its ability to quickly produce large-scale plastic parts at the lowest cost, becoming an indispensable, even dominant, manufacturing technology.