About Polystyrene(PS)

Mar 21, 2025 Leave a message

History

As early as the second half of the 15th century, a natural resin secreted by a class of conifers called "balsam" (which contains styrene components related to polystyrene) was used. However, it was studied from the chemical point of view after 1836, and the Styrene monomer was separated by Simon in Germany after distillation of balsam resin, and named "Styrene".
In 1839, Simon polymerized styrene to produce polystyrene, which he believed to be based on oxidation. In 1845, Blyth and Hoffman rejected this oxidation theory and considered it to be a solid styrene, thus naming it "Metastylene" (polystyrene).
In 1869, Berthelot of France discovered that styrene could be synthesized from styrene and ethylene. Subsequently, in 1920, Staudinger, Germany, carried out the polymerization of styrene and the cracking of polymers, thereby proposing that polystyrene is a linear polymer formed by styrene monomers linked together, and used it as a proof of the concept of polymers, established the polymer theory.
The industrialization of polystyrene is of interest based on its ability as a glassy transparent insulating material, but the industrialization of synthetic raw material styrene is more difficult. On the other hand, in the study of synthetic rubber carried out in Germany in 1933, the preparation of styrene butadiene rubber by the copolymerization of butadiene and styrene was successful, and was paid attention to as a strategic material, which quickly promoted the industrialization of styrene. In 1934, styrene was successfully synthesized by the dehydrogenation of ethyl benzene, and a year later, the industrialization of polystyrene was also declared successful.

 

Molecular structure

PS is generally a head-tail structure, the main chain is a saturated carbon chain, and the side group is a benzene ring with a conjugate system, which makes the molecular structure irregular, increases the molecular rigidity, and makes PS an amorphous linear polymer. Due to the presence of benzene ring, PS has a high Tg (80 ~ 105 ℃), so it is transparent and hard at room temperature, and it is easy to cause stress cracking due to the rigidity of the molecular chain. The presence of the side phenyl group makes the chemical activity of polystyrene greater, and the characteristic reactions that can be carried out by the benzene ring, such as chlorination, nitration, sulfonation, etc., can be carried out on polystyrene. In addition, the side phenyl group can activate the α hydrogen atoms on the main chain, which is easily oxidized to produce peroxide in the air, and cause degradation. Therefore, products are easy to yellow and brittle in outdoor use for a long time. However, because the benzene ring is a conjugated system, the radiation resistance of the polymer is good, and its properties change little under strong radiation conditions.

f11f3a292df5e0fe9925a2843d3923a85edf8cb1d4a7

 

Physicochemical property

Decomposition temperature: 30~80 ℃
Refractive index n20/D: 1.5916
Dielectric constant: 24.0
Melting point: 240 ℃
Relative density (water =1) : 1.04 ~ 1.13  (amorphous density 1.04 ~ 1.06 g/cm3, crystal density 1.11 ~ 1.12 g/cm3) 
Flash point: 345 ~ 360 ° C(cloud flash point of polystyrene dust)
Spontaneous combustion temperature: 427 ℃ 
Glass transition temperature of polystyrene: 80 ~ 105 ℃ (among which, atactic polystyrene is 100 ℃ (or 105 ℃), isotactic polystyrene is 100 ℃)
Conductivity: 10-16 S/m
Thermal conductivity: 0.08W /(m·K)
Young's modulus: 3000 ~ 3600 MPa
Tensile strength: 46 ~ 60 MPa
Elongation: 3% ~ 4%
Charpy impact test: 2 ~ 5 kJ/m2
Thermal expansion coefficient: 8×10-5/K
Heat capacity: 1.3kJ /(kg·K)
Water absorption: 0.03% ~ 0.1%
Degradation temperature: 280 ℃
Resistivity: 1020 ~ 1022 Ω·cm.