Special processes for the production of thermoforming materials
Small sheets of advanced materials are sometimes used for injection molding, such as polyurethane sheets for thermoforming heart models.
When it is not possible to produce double-layer laminates by co-extrusion, the two-layer laminates can be laminates, thermal bonding processes such as flame treatment or bonding (polyurethane adhesive).
Bidirectional stretching after extrusion can produce oriented polystyrene (OPS).
Processing technology of thermoplastic thermoforming materials
After piecing together, the surface of the material will immediately produce a texture. When the extrusion temperature is high, you can use embossing on the surface. When the material is heated on the thermoforming machine, the surface nicks are recovered by cooling, such as damage
The texture effect of the lost surface will become smooth.
Sealing layer or extrusion coating, one ship with multiple extruders co-extrusion process, two layers of sheet in the slit head
Internal bonding or fusion when the melt is just extruded from the head.
When printing thermoforming materials, in addition to printing colors, thermal bonding coatings and protective coatings can be used. As a printing pigment required for thermoforming, pigment types that have good compatibility with plastic materials should be used to ensure their good adhesion.
Flocking is a treatment process in which nylon fibers are flocking to the surface of a material, usually with a special adhesive.
Due to the tensile effect of thermoforming, the flocking will be separated from the surface of the material. The flocking side is not in contact with the die surface during thermoforming.
Metallization under high vacuum conditions is the evaporation of aluminum onto one side of the sheet surface. The following materials can be metallized: polystyrene (PS), polyester (PET), polyvinyl chloride (PVC), polypropylene (PP), etc. The plating is not secure. Metallized materials can be used for thermoforming, but the aluminum layer is thinned when stretched and becomes opaque as a result.
The electroplated sheet covering the compression layer becomes a reflective sheet, which can be molded thermoformed with only a limited amount of stretch.
For metallized and electroplated thermoforming materials, the electroplated side reflects the thermal radiation of the radiant heater, so only the side that is not metallized can be heated. If electroplating plastic parts after thermoforming, special electroplating materials should be used.
The process of thermoforming plastics
Mar 14, 2025
Leave a message
